合聘教師   首頁 師資介紹 合聘教師
潘敏俊 教授 Min-Chun Pan
從聘系所: 機械系主聘
專線電話:03-4267312
傳真電話:03-4254501
個人網站:
學經歷

[學歷]:
機械工程博士,比利時荷語魯汶大學(Katholieke Universiteit Leuven) 機械系 
機械工程碩士,比利時荷語魯汶大學(Katholieke Universiteit Leuven) 機械系
機械工程碩士,成功大學 機械系
機械工程學士,成功大學 機械系

[經歷]:
諮商輔導中心主任(10/2014– ),中央大學 學務處
Fulbright Visiting Scholar (08/2013–08/2014), Morgridge Institute for Research, UW Madison
教授(08/2007– ),中央大學 機械系 (Professor, Dept. of Mech. Eng., NCU)
生醫所所長(08/2010 – 07/2013),中央大學 生醫工程研究所
教授(08/2007–07/2014),中央大學 生醫工程研究所 (Professor, Institute of Biomedical Eng.)
訪問教授(12/2007–06/2008),Thayer School of Engineering, Dartmouth College
顧問(01/2008-12/2008),工研院 能環所
副教授(08/2003–07/2007),中央大學 機械系
助理教授(02/1999 – 07/2003),中央大學 機械系
兼任副教授(08/1997 – 07/1999),中央警察大學 鑑識科學研究所 (Adjunct Associate Professor, Institute of Forensic Science, Central Police University)
高級研究員(12/1996 – 02/1999),三陽工業 研發中心發展室 (Senior Researcher, Center of Research and Development, San-Yang Industry Co.)
專案工程師(08/1996 – 12/1996),東元電機 研發處機研小組
副工程師,工研院 機械所
專任助教,成功大學 機械系
少尉,中華民國陸軍 野戰砲兵
機械工程助理,中山科學研究院 二所


論文著作區

題目

作者姓名

期刊名稱

出版
年份

期別及
起訖頁數

Design and Fabrication of Prostrate Ring-scanning Equipment for NIR Diffuse Optical Imaging

5. J.-M. Yu, M.-Cheng Pan, Y.-F. Hsu, L.-Y. Chen and M.-Chun Pan*

ASME Transactions, Journal of Medical Devices,

2014

Vol.8, No.3, 030942.

Design and Implementation of Assistive Devices for Post-stroke Rehabilitation of Hand and Fingers

K. Kao, J.-J. Huang and M.-Ch. Pan*

ASME Transactions, Journal of Medical Devices

2014

Vol.8, No.2, 020932.

Numerical Characterization of Bone Defects after Dental Implantation

B.-X. Hsieh, Ch.-S. Chen, and M.-Ch. Pan*

ASME Transactions, Journal of Medical Devices

2014

Vol.8, No.2, 020942.

Assessment of Dental Implantation Osseointegration through Electro-Magnetic Actuation and Detection

T. Sh. Chia, Ch.-S. Chen and M.-Ch. Pan*

ASME Transactions, Journal of Medical Devices

2014

Vol.8, No.3, 030940.

A noncontact detection technique for interfacial bone defects and osseointegration assessment surrounding dental implants

H.B. Zhuang, M.Ch. Pan*, J.Z. Chen, J.W. Wu, C.S. Chen

Measurement

2014

Vol.55, pp.335-342.

Design for Source-and-detector Configuration of a Ring-scanning-based NIR Optical Imaging System

Jhao-Ming Yu, Min-Cheng Pan, and Min-Chun Pan

Optical Engineering

2014

Vol. 53, No. 1, 011002.

Spectral Analysis Based Limb Movement Reconstruction Using Inertial Sensing Data

Jheng-Jie Huang, Chi-Tai Yang, Bo-Chuan Chen, and Min-Chun Pan

ASME Transactions, Journal of Medical Devices

2013

Vol.7, No.2, 020941.

Parallel Scanning Architecture for Mammogram-Based Diffuse Optical Imaging

Jhao-Ming Yu, Liang-Yu Chen, Hung-Chih Chiang, Min-Cheng Pan, Sheng-Yih Sun, and Chia-Cheng Chou, and Min-Chun Pan

ASME Transactions, Journal of Medical Devices

2013

Vol.7, No.2, 020936.

A noncontact resonance frequency detection technique for the interfacial bone defect assessment around the dental implant

M.-Ch. Pan, H.B. Zhuang, Ch.-S. Chen, J.-W. Wu, Sh.-Y. Lee

Medical Engineering & Physics

2013

Vol.35, No.10, pp.1825–1830.

Flexible Near Infrared Diffuse Optical Tomography with Varied Weighting Functions of Edge-preserving Regularization

L.-Y. Chen, M.-Cheng Pan, and M.-Chun Pan

Applied Optics

2013

Vol. 52, Iss. 6, pp. 1173–1182.

Using Appropriate IMFs for Envelope Analysis in Multiple Fault Diagnosis of Ball Bearings

W. C. Tsao, M.-Ch. Pan

International Journal of Mechanical Sciences

2013

Vol. 69, pp.114-124.

Visualized Numerical Assessment for Near Infra-red Diffuse Optical Tomography with Contrast-and-size Detail Analysis

Liang-Yu Chen, Min-Cheng Pan, Min-Chun Pan

Optical Review

2013

Vol. 20, No. 1, pp.19-25.

Noncontact Vibro-acoustic Detection Technique for Dental Osseointegration Examination

Han-Bo Zhuang, Wei-Shan Tu, Min-Chun Pan*, Jer-Whey Wu, Chin-Sung Chen, Shyh-Yuan Lee, Yuan-Chao Yang

Journal of Medical and Biological Engineering

2013

Vol. 33, No. 1, pp. 35-43.

Effect of Fabrication Parameters on the Characteristics of Fresnel Lens and Piezoelectric Transducers

Tuan-Anh Bui, Min-Chun Pan*, Wen-Ching Shih, and Chien-Cheh Lee

Ferroelectrics

2012

Vol. 437, No. 1, pp. 70-80.

An Insight Concept to Select Appropriate IMFs Proceeded with Envelope Analysis for Bearing Fault Diagnosis

W.-Ch. Tsao, Y.-F. Li, D.D. Le and M.-Ch. Pan*

Measurement

2012

Vol. 45, Issue 6, pp.1489-1498.

Implementation of Edge-Preserving Regularization for Frequency-Domain Diffuse Optical Tomography

L.-Y. Chen, M.-Chun Pan and M.-Cheng Pan

Applied Optics

2012

Vol. 51, No. 1, pp.43-54.

Fabrication of highly c-axis textured ZnO thin film piezoelectric transducers by RF sputtering

Min-Chun Pan, Tzon-Han Wu, Tuan-Anh Bui, Wen-Ching Shih

Journal of Materials Science: Materials in Electronics

2012

Vol.23, pp.418-424.

Design and Implementation of Noncontact Measurement Device for Irregular Dental Osseointegration Detection

H. B. Zhuang, Jeffery Wu, C. S. Chen, S. Y. Lee, Min-Chun Pan*, and Y. C. Yang

ASME, Journal of Medical Devices

2011

Vol. 5, Issue 2, 027526.

Dual-Direction Optical Measurement Instrument for Assisting X-Ray Mammography

H.-Z. Jiang, J.-Y. Chen, M.-Cheng Pan, Ch.-T. Wu, S.-Y. Sun and M.-Chun Pan

ASME, Journal of Medical Devices

2011

Vol. 5, Issue 2, 027526.

Study of Start-up Vibration Response for Oil Whirl, Oil Whip and Dry Whip

Chen-Chao Fan, Jhe-Wei Syu, Min-Chun Pan* and Wen-Chang Tsao

Mechanical Systems and Signal Processing

2011

Vol.25, Issue 8, pp.3102-3115.

Fabrication of ultrasonic focusing ejector by using C-axis textured ZnO films

M.-Ch. Pan, T.-A. Bui, Y.-Ch. Nien, and W.-Ch. Shih*

Japanese Journal of Applied Physics

2011

Vol. 50, 07HD02.

Active elimination of oil whip and dry whip in a rotating machine with an electromagnetic exciter

Ch.-Ch. Fan and M.-Ch. Pan

International Journal of Mechanical Sciences

2011

Vol.53, pp.126-134.

Experimental Study on the Whip Elimination of Rotor-Bearing System with Electromagnetic Exciters

Ch.-Ch. Fan and M.-Ch. Pan*

Mechanism and Machine Theory

2011

Vol. 46, pp. 290-304.

Breast Tumor Detection Instrument Through Mammography Based NIR DOT

J.-Y. Chen, H.-Z. Jiang, L.-Y. Chen, M.-Chun Pan*, Ch.-T. Wu, and M.-Cheng Pan

Journal of Medical Devices, Transactions of the ASME

2010

Vol. 4, Issue 2, 027529.

Irregular Bone Defect Detection and Device on Dental Implants

H.-B. Zhuang and M.-Ch. Pan

Journal of Medical Devices, Transactions of the ASME

2010

Vol. 4, Issue 2, 027521.

Thermal Deformation Characterization on the Panel of TFT-LCD TV (II) - Solutions to Thermal-Induced Extrusion Degrading Image Quality

Ch.-Y. Chu and M.-Ch. Pan*

Journal of the Society for Information Display

2010

Vol. 18 (5), pp.357-367.

Fluid-induced Instability Elimination of Rotor-Bearing System with an Electromagnetic Exciter

Ch.-Ch. Fan and M.-Ch. Pan*

International Journal of Mechanical Sciences

2010

Vol. 52, pp. 581-589.

Rapid Convergence to the Inverse Solution Regularized with Lorentzian Distributed Function for Near Infrared Continuous Wave Diffuse Optical Tomography

M.-Cheng Pan and M.-Chun Pan*

Journal of Biomedical Optics

2010

Vol. 15(1), 016014.

Effective Thermal Emission on TFT-LCD TV Panels for Improving Image Quality

Chung-Yi Chu and Min-Chun Pan*

Advances in Engineering Software

2010

Vol. 41, pp.130-140.

Extended Angular-Velocity Vold-Kalman Order Tracking

M.-Ch. Pan and Ch.-X. Wu

Journal of Dynamic Systems Measurement and Control-Transactions of the ASME

2010

Vol.132 (3), 031001.

Adaptive Hybrid Tracking-Error Control for DVD Drives in Vehicle Systems

M.-Ch. Pan and Ch. Chien

Microsystem Technologies

2010

Vol.16, Issues 1-2, pp.279-286.

Near Infra-red Tomographic Imaging System Based on a Highly Angular Spatial-Resolution Mechanism Design, Calibration, and Performance

M.-Chun Pan, Ch.-H. Chen, M.-Cheng Pan and Y.-M. Shyr

Measurement

2009

Vol.42, Issue 3, pp.377-389.

Thermal Deformation Characterization on the Panel of TFT-LCD TV (I)- Mechanism of Color Distortion

Ch.-Y. Chu, Chih-Po Chan and M.-Ch. Pan*

Journal of the Society for Information Display

2009

Vol.17, Issue 8, pp.635-645.

Remote Online Machine Condition Monitoring System

M.-Ch. Pan, P.-Ch. Lee and Y.-R. Cheng

Measurement

2008

Vol.41, Issue 8, pp.912-921.

Highly-resolved Diffuse Optical Tomography: A Systematical Approach Using High-pass Filtering for Value- preserved Images

M.-Cheng Pan, Ch.-H. Chen, L.-Y. Chen, M.-Chun Pan* and Y.-M. Shyr

Journal of Biomedical Optics

2008

Vol. 13(02), 024022.

 


研究計畫區

工作類別

姓名

計畫名稱

執行期限

補助單位

金額

主持人

潘敏俊

功能性擴散光學斷層造影系統分析設計製作暨驗證

2012-08-01 ~ 2015-07-31

國科會

4,175,000

主持人

潘敏俊

基於乳房攝影結構影像之擴散光學造影技術研究

2012-08-01 ~ 2014-07-31

國科會

3,035,000

主持人

潘敏俊

臨床腫瘤診斷用之擴散光學斷層掃描系統研究發展

2009-08-01 ~ 2012-07-31

國科會

2,241,000

主持人

潘敏俊

中風病患肩肘協調多模態復健系統之研製及復健成效評(總計劃) / 具感知訊號無線回饋及客觀評量分析之復健輔助儀器開發 (子計畫四)

2011-01-01 ~ 2011-12-31

鄒濟勳基金會/榮總台灣聯大

814,500

主持人

潘敏俊

雙成像診斷技術發展於乳房腫瘤偵測之應用

2011-01-01 ~ 2011-12-31

國科會

1,720,000

主持人

潘敏俊

牙科植體術後不規則骨缺損檢測技術發展與檢測裝置研製

2008-08-01 ~ 2011-07-31

國科會

2,939,626

主持人

潘敏俊

旋轉機械設備監測技術發展先期研究/轉動設備診斷準確性之驗證研究

2008-01-01 ~ 2008-12-31

工研院 能環所

520,000

主持人

潘敏俊

近紅外光擴散式光學組織斷層掃描技術發展(I)(II)(III)

2006-01-01 ~ 2008-12-31

鄒濟勳基金會/榮總台灣聯大

1,370,000

主持人

潘敏俊

彩色濾光片新製程與設備之研發-子計畫二:超音波聚焦噴墨系統設計開發

2007-08-01 ~ 2008-07-31

國科會

890,000

主持人

潘敏俊

光碟製程設備智慧型診斷與維修保養系統之發展-(子計畫二)設備關鍵組件遠端智能性故障診斷系統發展

2004-08-01 ~ 2007-07-31

國科會

2,893,000

主持人

潘敏俊

次世代TFT-LCD光阻塗佈製程與設備之研發- (子計畫二) 玻璃基板壓電/超音波塗佈子系統設計開發

2004-08-01 ~ 2007-07-31

國科會

3,660,000

主持人

潘敏俊

渦輪幫浦離線平衡校正技術發展

2006-05-01 ~ 2007-04-30

國科會/致揚科技

627,000

主持人

潘敏俊

TFT-LCD模組PCB/COG/COF衝擊/掉落分析試驗

2004-11-01 ~ 2005-10-31

國科會/律頻科技

605,200

主持人

潘敏俊

抗背景噪音麥克風技術研究

2004-10-01 ~ 2005-03-31

因泰國際

202,000

主持人

潘敏俊

精密機械失效模式預知診斷技術發展

2004-03-01 ~ 2004-12-31

精密機械研發中心

500,000

主持人

潘敏俊

2DSA共通性研究及後續型態識別技術發展(I)(II)

2002-08-01 ~ 2004-07-31

國科會

1,309,200

主持人

潘敏俊

平面顯示器 掉落/衝擊 分析試驗暨設變研究

2003-06-01 ~ 2004-05-31

國科會/律頻科技

631,800

主持人

潘敏俊

傳動噪音量測分析技術建置研究

2003-03-01 ~ 2003-08-31

桂盟工業

248,600

主持人

潘敏俊

TFT-LCD 掉落/衝擊 模擬及試驗研究

2002-06-01 ~ 2003-05-31

國科會/律頻科技

407,600

主持人

潘敏俊

非穩態瞬間大功率噪音之主動式消音耳罩研製

2002-01-01 ~ 2002-12-31

國科會

628,000

主持人

潘敏俊

動態信號二維分析整合研究及工程應用(I)(II)

2000-08-01 ~ 2002-07-31

國科會

1,063,400

主持人

潘敏俊

空腔模態聲輻射效能探討應用與暫態非穩態複頻空間噪音消除

2001-01-01 ~ 2001-12-31

國科會

609,000

主持人

潘敏俊

火箭發射噪音消除器之研究與設計(I)(II)

1999-07-01 ~ 2000-12-31

國科會

878,000

主持人

潘敏俊

信號Time-Frequency Distribution研究及分析

1999-09-01 ~ 2000-08-31

工研院量測中心

487,960

主持人

潘敏俊

適應性階次分析技術之發展及其於多轉軸系統之應用

1999-08-01 ~ 2000-07-31

國科會

277,100

專利區

類別

專利申請案件名稱

國別

發明人

提申案號/證書號/
權利期間

專利簡介

發明

運動軌跡重建系統及運動軌跡重建方法

中華民國

潘敏俊、楊其泰、吳炤民


I459247
2014/11/01-2032/11/13

一種運動軌跡重建方法如下所述。自一運動中之慣性感測器取得角速度時域資料與線加速度時域資料。對角速度時域資料進行頻譜分析,以獲得一角速度頻域資料。依據角速度頻域資料之頻譜,選出主要頻波。將僅含有主要頻波之角速度頻域資料轉換為一角位移時域資料。藉由角位移時域資料與線加速度時域資料,取得一線位移時域資料。依據線位移時域資料與角位移時域資料,重建並顯示慣性感測器之運動軌跡。

發明

System and Method for Detecting Irregular Bone Defects During Dental Implant Osseointegration Process

美國

Min-Chun Pan, Jian-Zhi Chen

The present invention generally relates to a medical diagnostic technology, in particular to a system capable of precisely detecting irregular bone defects of the contact surface between the dental implant and the alveolus bone.

發明

牙科植體骨整合期之骨缺損檢測系統及其控制方法

中華民國

潘敏俊、陳建智


I449518
2014/08/21-2031/11/14

本發明係揭露一種牙科植體骨整合期之骨缺損檢測系統及其控制方法。此系統包含檢測承座、超音波驅動器及訊號接收分析器。當檢測時,將檢測承座被設置於牙科植體之基台上,再透過超音波驅動器驅動設置於檢測承座上之複數個壓電換能器產生超音波,並傳遞至牙科植體與齒槽骨之接合面,複數個壓電換能器能同時接收由牙科植體與齒槽骨之接合面各部位反射超音波所產生之反射波,並將反射波轉換為電壓時域訊號,再回傳至訊號接收分析器,以測定牙科植體與齒槽骨之接合面各部位之骨缺損深度、嚴重程度及方位。

發明

骨缺損檢測系統

中華民國

潘敏俊、莊瀚伯、李肇平


I424834
2011/09/22-2031/09/21

一種骨缺損檢測系統包含一檢測裝置及一齒科承座。檢測裝置係與齒科承座以無線傳輸方式連結。齒科承座包含一振動件、至少一激振傳感器、及至少一響應感測器。振動件係用以鎖附於一牙科植體內。激振傳感器係非接觸地設置於振動件之一側,藉以激振振動件。響應感測器係設置於振動件之另一側,藉以感測振動件之振動。

發明

IMAGE RECONSTRUCTION METHOD

美國

Min-Chun PAN, Hung-Chih Chiang, Liang-Yu Chen, Min-Cheng PAN


US8,712,136B2
2012/02/16-2032/05/10

Embodiments of the present invention relate to an algorithm used in body imaging. More particularly, embodiments of the present invention relate to an image reconstruction method.

發明

影像重建方法

中華民國

潘敏俊、江鴻志、陳亮瑜、潘敏政


I433051
2011-2031

本發明專利所申請之概念為使用非均質初始條件,作為光學斷層掃描影像重建過程初始值之設定,因影像重建過程為非線性病態條件之反向問題,須藉由最小化誤差函數的方法進行疊代求解,疊代過程所需之初始條件,乃利用結構性影像之疑似病灶區域,設定二維或三維非均質狀態,可有效提高影像品質,並且於疊代過程可合併其他空間解析度強化方法,可更進一步改善空間解析度。此外,應用於光學斷層掃描量測訊息不足之情況,亦可協助其有效成像。

發明

Bidirectional Optical Scanner Assisting In Mammography

美國

Min-Chun PAN, Jhao-Ming Yu, Hung-Chih Chiang, Min-Cheng PAN Chun-Yu CHEN, Liang-Yu Chen


US8,395,120B2
2011/02/25-2031/02/25

The present invention relates to a bidirectional optical scanner, especially to a bidirectional optical scanner assisting in mammography with improved accuracy of breast cancer diagnosis.

發明

Bidirectional Optical Scanner Assisting In Mammography

美國

Min-Chun PAN, Hung-Chih Chiang, Chun-Yu Chen, Liang-Yu Chen, Ching-Tang Wu, Min-Cheng PAN


US8,378,302B2
2011/02/25-2031/04/29

The present invention relates to a bidirectional optical scanner, especially to a bidirectional optical scanner assisting in mammography with improved accuracy of breast cancer diagnosis.

發明

用於輔助X光乳房攝影之雙向光學掃描裝置

中華民國

潘敏俊、游釗銘、江鴻志、潘敏政、陳俊宇、陳亮瑜


I461179
2014/11/21– 2034/11/20

本發明專利技術所揭示之快速裝卸模組,使用於輔助X光乳房攝影之擴散光學掃描系統中。為考量實際檢測之作業需求,而提出一種快速裝卸模組,以使光學掃描系統得以快速且準確地掛載於X光乳房攝影機台上。為達此一目的,本技術設計兩組光學掃描模組與一對機構式校正器。對於多通道光電轉換部份,本技術提出陣列式光接受面板,即將數個光導管(任意可導光之管件)裝接於該面板上,利用陣列形式之設計,使單一光偵測器可完成數個光通道之接收作業,亦可擴增有限個光偵測器之數量,以使降低檢測作業時間。雙影像檢測程序設計,藉由標準檢測程序之制定,可達單一檢測程序,獲取結構性與功能性兩種影像之目的。

發明

Apparatus and Method of Irregular Bone Defect Detection of Dental Implant

美國

Min-Chun PAN, Han-Bo ZHUANG and Shyh-Yuan LEE


US8,167,614B2
2011/3/15– 2031/3/14

The present invention relates to bone defect detection; more particularly, relates to quantitatively evaluating an osseointegration between a dental implant and an alveolar bone through differences of dynamic characteristics of the dental implant and irregular bone defects and furthermore obtaining quality, direction and depth of bone defect.

發明

牙科植體不規則骨缺損檢測裝置及其方法

中華民國

潘敏俊、莊瀚伯、李世元


I365736
2012/6/11–2027/12/5

一種牙科植體不規則骨缺損檢測裝置及其方法,係一種非侵入式檢測評估方法。利用音響激振原理及檢測探頭之音響發射與激振接收佈置,可將測得之共振頻率(Resonance Frequency)值,歸納出結構共振頻率和骨缺損狀態之關係,藉由頻率隨缺損量增加而變小,及每對聲音傳感器/微加速規(Micro accelerometer)於各角度所處方位測得之結構共振頻率差異,足以辨識出各類不規則骨缺損量、方位及深度,藉此改善臨床常用X光二維影像判讀之不足,及市售共振頻率測量裝置僅呈現牙科植體整體(Overall)現象之限制,進而可協助醫生適當評估病患其牙科植體與齒槽骨之整合狀態,於必要時可進行骨整合強化後續處置,以提高植牙之成功率。

發明

Highly-Efficient Ultrasonic Ink-jet Head and Fabrication Method for the Same

美國

Min-Chun PAN, Lung-Ch CHANG, Jung-En HSIAO


US7,621,624 B2
2009/11/2–2027/5/17

The present invention relates to a highly-efficient ultrasonic ink-jet head and a fabrication method for the same, and more particularly to a special design that utilizes a reflection chamber to effectively enhance the use of ultrasonic energy.

發明

高效率聚焦噴墨裝置

中華民國

潘敏俊、張良琪、蕭榮恩


I319356 (
領證日: 2010/1/11)
2010/1/11–2027/4/12

本發明為一種高效率超音波噴墨頭及其製造方法,係在一支撐層上製作一壓電換能元件及一多階菲涅爾準平面透鏡結構,並於支撐層上利用光微影法蝕刻製作一腔體結構,再與一儲墨槽組合固定。

發明

Scanning device of multi-point simultaneous acquisition through diffuse optical tomography

美國

Min-Chun PAN, Chien-Hung CHEN, Min-Cheng PAN


US7,804,070 (
領證日: 2010/9/28)
2008/3/14– 2028/3/13

The present invention relates to a scanning device; more particularly, relates to a device of a multi-point simultaneous acquisition through a NIR DOT, where a reconstructed scanning image is obtained with a intensity modulated light through a frequency domain analysis theorem.

發明

多點同步量測之擴散光學斷層影像掃描裝置

中華民國

潘敏俊、陳建宏、潘敏政


I340031
2011/4/11–2027/11/7

一種多點同步量測之擴散光學斷層影像掃描裝置,為針對近紅外光擴散光學斷層掃描之單一光源且多點同步量測之裝置,適合光強度調變光源以頻率域分析理論重建掃描影像。

發明

Adaptive Real-Time Analysis Method for Dynamic Signals Generated by Rotary Machines

美國

Min-Chun Pan, Cheng-Xue Wu, Cian-De Ye


US7,991,590 B2
2011/8/2– 2028/1/3

The present invention relates to an adaptive real-time analyzing method for dynamic signals generated by rotary machines, which changes the conventional Vold-Kalman filtering (VKF) order tracking method operated by the off-line operation mode, and can simultaneously track time domain waveforms having multiple orders.